Lime Prime (10kg) - Spray / Roller

Application:

Apply Lime Prime by low pressure or with airless spray equipment with just one layer approximately 100 gr/m2, depending on the porosity of the substrate.

• Shake before use
• Remove dust and all friable parts from the substrate
• The application of Lime Prime does not avoid the need for substrate preparation
• Apply Lime Prime by low pressure spray or with airless spray equipment
• Apply only 1 layer, approximately 100 gr/m2, depending on the porosity of the substrate
• Allow to dry before application of water-born dispersion coatings
• Do not dilute
• Apply only on porous substrates
• Minimal application temperature : +5° C
• To be applied between +5° C to +35° C
• Do not apply in sunlight
• Clean tools with water

Typical uses:

• Older dusty substrates to consolidate such as lime-based rendering
• Water sensitive substrates such as gypsum board and gypsum plaster

Applied By: Spray or Roller

Size: 10kg

Key points:

• Retrofit
• Lime Plaster
• Lime Render
• For use with Passive Purple Retrofit
• Heritage
• Council Retrofit
• Housing Association Schemes

Technical Data Sheet

Install Guide

Safety Data Sheet

At Intelligent Membranes, we help architects, contractors, retrofitters and self-builders achieve airtightness and waterproofing targets with liquid-applied systems. Our flagship airtight system, Passive Purple®, is airtight at all times yet breathable when the building fabric needs to release vapour — we call this intelligent breathability.

Read more...